🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore

TEAM-4000.1D // 4700 Watts RMS Monoblock Car Amplifier

Product image 1
1 / 9
+4

TEAM-4000.1D // 4700 Watts RMS Monoblock Car Amplifier

Whether you're looking to cause a tectonic disturbance or generate dynamic instability in the atmosphere, the CT Sounds TEAM-4000.1D has the power to create the sonic explosion you crave. Engineered for efficiency, The CT Sounds class D amplifier will get you the power you need to destroy the competition in the SPL lanes. This class D monoblock amplifier has been engineered to get the greatest efficiency so you can get the most out of your vehicle's electrical system. 

Quick Facts:
RMS Power: 1Ω @ 14.4v 4669 Watts x 1-Channel
RMS Power: 2Ω @ 14.4v 2763 Watts x 1-Channel
RMS Power: 4Ω @ 14.4v 1429 Watts x 1-Channel
Power & Ground Input Size: 0 Gauge
Speaker Input Size: 8 Gauge

Technical specifications:

  1. Monoblock Class D Amplifier
  2. RMS Power at 1 Ohm: 4669 Watts x 1-Channel (14.4v)
  3. RMS Power at 2 Ohm: 2763 Watts x 1-Channel (14.4v)
  4. RMS Power at 4 Ohm: 1429 Watts x 1-Channel (14.4v)
  5. Frequency response: 10Hz ~ 250Hz
  6. Gain adjustment: 0.2v ~ 5v
  7. Subsonic adjustment: 10Hz ~ 50Hz
  8. Bass boost: 0dB ~ +9dB
  9. Signal to noise ratio: 100dB
  10. Damping factor: 180
  11. Minimum impedance: 1Ω (ohm)
  12. Low pass filter: 35Hz ~ 250Hz
  13. External fuse rating: 400A
  14. Bass level remote control (16.4ft): Yes
  15. Operating voltage (-ve ground): DC 12v
  16. Power inputs: Dual 0GA
  17. Bass knob: Remote gain control, clip light indicator, built in voltmeter & push-able on/off switch

Dimensions:

  • 258mm (W) x 67mm (H) x 650mm (L)

Features:

  1. MOSFET PWM (Pulse Width Modulated) power supply
  2. Soft turn on circuitry
  3. 1 ohm stable mono operation
  4. Variable input gain control, subsonic filter & low pass crossover
  5. Variable phase shift (0o ~ 180o) & bass boost
  6. Thermal, DC offset, overload and speaker short protection inbuilt
  7. Nickel plated RCAs, thus low resistance inputs to the amp
  8. LED power and protection indicators
  9. It comes with Remote Bass Knob; therefore allowing you to control power, on/off or subwoofer bass level easily
  10. This is a purely Class-D amplifier where the audio amplification is solely controlled by electronic amplifying switches inside; making the gain much more effective and enthusiastic

Whether you're looking to cause a tectonic disturbance or generate dynamic instability in the atmosphere, the CT Sounds TEAM-4000.1D has the power to create the sonic explosion you crave. Engineered for efficiency, The CT Sounds class D amplifier will get you the power you need to destroy the competition in the SPL lanes. This class D monoblock amplifier has been engineered to get the greatest efficiency so you can get the most out of your vehicle's electrical system. 

Quick Facts:
RMS Power: 1Ω @ 14.4v 4669 Watts x 1-Channel
RMS Power: 2Ω @ 14.4v 2763 Watts x 1-Channel
RMS Power: 4Ω @ 14.4v 1429 Watts x 1-Channel
Power & Ground Input Size: 0 Gauge
Speaker Input Size: 8 Gauge

Technical specifications:

  1. Monoblock Class D Amplifier
  2. RMS Power at 1 Ohm: 4669 Watts x 1-Channel (14.4v)
  3. RMS Power at 2 Ohm: 2763 Watts x 1-Channel (14.4v)
  4. RMS Power at 4 Ohm: 1429 Watts x 1-Channel (14.4v)
  5. Frequency response: 10Hz ~ 250Hz
  6. Gain adjustment: 0.2v ~ 5v
  7. Subsonic adjustment: 10Hz ~ 50Hz
  8. Bass boost: 0dB ~ +9dB
  9. Signal to noise ratio: 100dB
  10. Damping factor: 180
  11. Minimum impedance: 1Ω (ohm)
  12. Low pass filter: 35Hz ~ 250Hz
  13. External fuse rating: 400A
  14. Bass level remote control (16.4ft): Yes
  15. Operating voltage (-ve ground): DC 12v
  16. Power inputs: Dual 0GA
  17. Bass knob: Remote gain control, clip light indicator, built in voltmeter & push-able on/off switch

Dimensions:

  • 258mm (W) x 67mm (H) x 650mm (L)

Features:

  1. MOSFET PWM (Pulse Width Modulated) power supply
  2. Soft turn on circuitry
  3. 1 ohm stable mono operation
  4. Variable input gain control, subsonic filter & low pass crossover
  5. Variable phase shift (0o ~ 180o) & bass boost
  6. Thermal, DC offset, overload and speaker short protection inbuilt
  7. Nickel plated RCAs, thus low resistance inputs to the amp
  8. LED power and protection indicators
  9. It comes with Remote Bass Knob; therefore allowing you to control power, on/off or subwoofer bass level easily
  10. This is a purely Class-D amplifier where the audio amplification is solely controlled by electronic amplifying switches inside; making the gain much more effective and enthusiastic
$899.99
TEAM-4000.1D // 4700 Watts RMS Monoblock Car Amplifier—
$899.99

Description

Whether you're looking to cause a tectonic disturbance or generate dynamic instability in the atmosphere, the CT Sounds TEAM-4000.1D has the power to create the sonic explosion you crave. Engineered for efficiency, The CT Sounds class D amplifier will get you the power you need to destroy the competition in the SPL lanes. This class D monoblock amplifier has been engineered to get the greatest efficiency so you can get the most out of your vehicle's electrical system. 

Quick Facts:
RMS Power: 1Ω @ 14.4v 4669 Watts x 1-Channel
RMS Power: 2Ω @ 14.4v 2763 Watts x 1-Channel
RMS Power: 4Ω @ 14.4v 1429 Watts x 1-Channel
Power & Ground Input Size: 0 Gauge
Speaker Input Size: 8 Gauge

Technical specifications:

  1. Monoblock Class D Amplifier
  2. RMS Power at 1 Ohm: 4669 Watts x 1-Channel (14.4v)
  3. RMS Power at 2 Ohm: 2763 Watts x 1-Channel (14.4v)
  4. RMS Power at 4 Ohm: 1429 Watts x 1-Channel (14.4v)
  5. Frequency response: 10Hz ~ 250Hz
  6. Gain adjustment: 0.2v ~ 5v
  7. Subsonic adjustment: 10Hz ~ 50Hz
  8. Bass boost: 0dB ~ +9dB
  9. Signal to noise ratio: 100dB
  10. Damping factor: 180
  11. Minimum impedance: 1Ω (ohm)
  12. Low pass filter: 35Hz ~ 250Hz
  13. External fuse rating: 400A
  14. Bass level remote control (16.4ft): Yes
  15. Operating voltage (-ve ground): DC 12v
  16. Power inputs: Dual 0GA
  17. Bass knob: Remote gain control, clip light indicator, built in voltmeter & push-able on/off switch

Dimensions:

  • 258mm (W) x 67mm (H) x 650mm (L)

Features:

  1. MOSFET PWM (Pulse Width Modulated) power supply
  2. Soft turn on circuitry
  3. 1 ohm stable mono operation
  4. Variable input gain control, subsonic filter & low pass crossover
  5. Variable phase shift (0o ~ 180o) & bass boost
  6. Thermal, DC offset, overload and speaker short protection inbuilt
  7. Nickel plated RCAs, thus low resistance inputs to the amp
  8. LED power and protection indicators
  9. It comes with Remote Bass Knob; therefore allowing you to control power, on/off or subwoofer bass level easily
  10. This is a purely Class-D amplifier where the audio amplification is solely controlled by electronic amplifying switches inside; making the gain much more effective and enthusiastic